Advanced Wireless Communications MINI PRO Guia do Utilizador descarregar pdf (Página 57)

802.11n Mode

The 802.11n standard builds on previous 802.11

standards by adding multiple-input multiple-output

(MIMO). MIMO increases data throughput to

improve transfer rate. Select Enabled or Disabled

to set the 802.11n mode of the WiFi adapter.

Enabled is the default setting.

An administrator can enable or disable support for

high throughput mode to reduce power-

consumption or conflicts with other bands or

compatibility issues.

NOTE: This setting is available only if the WiFi

adapter is one of the following:

● Intel(R) WiMAX/WiFi Link 5350

● Intel(R) WiMAX/WiFi Link 5150

● Intel(R) WiFi Link 5300

● Intel(R) WiFi Link 5100

● Intel(R) Wireless WiFi Link 4965AGN

NOTE: To achieve transfer rates greater than 54

Mbps on 802.11n connections, WPA2-AES security

must be selected. No security (None) can be

selected to enable network setup and

troubleshooting.

Ad Hoc Channel

Unless the other computers in the ad hoc network

use a different channel from the default channel,

there is no need to change the channel.

Value: Select the permitted operating channel from

the list.

● 802.11b/g: Select this option when 802.11b

and 802.11g (2.4 GHz) ad hoc band

frequency is used.

● 802.11a: Select this option when 802.11a (5

GHz) ad hoc band frequency is used.

NOTE: When an 802.11a channel is not displayed,

initiating ad hoc networks is not supported for

802.11a channels.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 284 285

Sem comentários

Advanced Wireless Communications MINI PRO Guia do Utilizador Página 57