Advanced Wireless Communications MINI PRO Guia do Utilizador descarregar pdf (Página 159)

WiFi Network Name (SSID) display. Network (Infrastructure) should be selected as

the Operating Mode.

4. Click Next to open the Security Settings.

5. Select Personal Security.

6. Security Settings: Select WPA-Personal (TKIP) to provide security to a small

business network or home environment. A password, called a pre-shared key (PSK), is

used. The longer the password, the stronger the security of the wireless network.

If your wireless access point or router supports WPA2-Personal, then you should

enable it on the access point and provide a long, strong password. The longer

the password, the stronger the security of the wireless network. The same

password entered in the access point needs to be used on this computer and all

other wireless devices that access the wireless network.

NOTE: WPA-Personal and WPA2-Personal are interoperable.

7. Wireless Security Password (Encryption Key): Enter a text phrase with eight to

63 characters. Verify that the network key matches the password in the wireless

access point.

8. Click OK to return to the Profiles list.

Set up a Client with WPA*-Personal (AES-CCMP) or WPA2*-Personal

(AES-CCMP) Security Settings

Wi-Fi Protected Access (WPA*) is a security enhancement that strongly increases the level of

data protection and access control to a wireless network. WPA enforces 802.1X

authentication and key-exchange and only works with dynamic encryption keys. For a home

user or small business, WPA-Personal uses either Advanced Encryption Standard - Counter

CBC-MAC Protocol (AES-CCMP) or Temporal Key Integrity Protocol (TKIP).

NOTE: For the Intel(R) Wireless WiFi Link 4965AGN adapter, to achieve transfer rates

greater than 54 Mbps on 802.11n connections, WPA2-AES security must be selected. No

security (None) can be selected to enable network setup and troubleshooting.

To create a profile with WPA2*-Personal network authentication and AES-CCMP data

encryption:

1. On the WiFi connection utility main window, double-click an infrastructure network

from the WiFi Networks list or select the network and click Connect.

2. If these are being transmitted, the Profile name and WiFi Network Name (SSID)

should display on the General Settings screen. Network (Infrastructure) should

be selected as the Operating Mode. Click Next to open the Security Settings.

3. Select Personal Security.

1 2 ... 154 155 156 157 158 159 160 161 162 163 164 ... 284 285

Sem comentários

Advanced Wireless Communications MINI PRO Guia do Utilizador Página 159